Glaziers
Glaziers and Asbestos Exposure: Window Putty, Caulking Compounds, and Glazing Materials Created Sustained Mesothelioma Risk (1940-1980)
Executive Summary
Glaziers—skilled tradespeople who install glass in windows, doors, skylights, and storefronts—experienced significant asbestos exposure from the putty, caulking, and sealing compounds essential to their trade from the 1940s through 1980.[1] Window glazing putty contained 5-15% asbestos, caulking compounds contained 5-25% asbestos, and specialty glazing materials contained 3-12% asbestos—fibers that were released during application, removal, and renovation work.[2] Landmark litigation against DAP Inc.—a major caulk and putty manufacturer—established manufacturer liability for asbestos-related diseases in glazing products, with courts allowing multiple mesothelioma lawsuits to proceed.[3] The Italian National Mesothelioma Registry documented the construction sector as a primary exposure source, with glass and window installation representing a documented occupational category. Glaziers now qualify for compensation through more than 60 bankruptcy trusts holding over $30 billion.[4]
Glazier asbestos exposure at a glance:
- Bare-hand contact daily — unlike most construction trades, glaziers kneaded putty and tooled caulking without gloves because direct skin contact was needed for proper application and finishing[1]
- Products contained up to 25% asbestos — caulking compounds had the highest fiber concentration among common glazing materials, exceeding most general construction products of the same era[2]
- Renovation work amplified risk — scraping dried, decades-old putty released friable asbestos more readily than fresh application because weathering breaks down the binding matrix over time[5]
- DAP caulk lawsuits established precedent — courts repeatedly denied manufacturer dismissal motions, confirming that glazing product companies knew about asbestos hazards and failed to warn workers[3]
- 47.8-year average latency — the Italian National Mesothelioma Registry documented the longest average delay among construction subcategories, meaning 1970s glaziers are being diagnosed now[6]
- Gaskets contained 40-90% asbestos — the highest concentration of any product glaziers handled, releasing dense fiber loads during cutting and compression fitting[7]
- Multiple trusts cover glazier products — Garlock, Flexitallic, Johns-Manville, Owens Corning, and Celotex trusts all accept claims from workers exposed to glazing-related asbestos products[4]
- Legacy hazard in every pre-1980 building — millions of windows nationwide still contain original asbestos-containing putty and caulking, creating ongoing exposure risk during replacement and renovation[8]
Key Facts
| Metric | Finding |
|---|---|
| Window Putty Asbestos Content | 5-15% chrysotile in traditional glazing putty across all major brands (Product Testing Data)[9] |
| Caulking Compound Content | 5-25% asbestos in sealing and weatherproofing formulations; fire-stop caulk reached highest concentrations (Manufacturer Records)[2] |
| Glazing Compound Content | 3-12% asbestos in specialty glass setting materials including polysulfide and butyl compounds (Product Analysis)[10] |
| Gasket Material Content | 40-90% asbestos in rubber and fiber gaskets used for window frame seals and storefront systems (Garlock Product Data)[7] |
| Peak Exposure Period | 1940-1980 — millions of windows installed and maintained during the post-war construction boom (Census of Construction)[1] |
| Italian Registry Cases | 3,574 mesothelioma cases with "certain" occupational exposure in the construction sector including glazing trades (ReNaM, 1993-2018)[6] |
| Mean Latency Period | 47.8 years from first exposure to mesothelioma diagnosis in construction-sector cases (Italian National Registry)[6] |
| Key Defendant — DAP Inc. | Multiple lawsuits active — courts denied DAP's motions to dismiss; established manufacturer liability for asbestos caulk (Court Records)[3] |
| Major Manufacturers | DAP, 3M, Tremco, Pecora, Gibson-Homans — collectively produced the majority of asbestos-containing glazing products (Industry Records)[11] |
| Trust Fund Availability | $30+ billion across 60+ active trusts; Garlock pays $4,000-$175,000+; Johns-Manville pays $7,000-$350,000+ (Trust Reports)[12] |
| Average Settlement Range | $1 million–$1.4 million for mesothelioma cases involving construction workers (Settlement Data)[13] |
| OSHA Permissible Exposure Limit | 0.1 f/cc (8-hour TWA) — removal of asbestos-containing caulk and putty classified as Class II work (29 CFR 1926.1101)[14] |
Why Did Glaziers Face Asbestos Exposure?
Glaziers encountered asbestos exposure because the products fundamental to their trade—putty, caulking, sealants, and glazing compounds—incorporated asbestos fibers to enhance performance characteristics essential for window installation.[7]
Asbestos improved product performance in multiple ways. Manufacturers added asbestos to glazing products because the mineral fibers provided:
- Enhanced durability: Asbestos prevented cracking and deterioration
- Weather resistance: Fibers improved resistance to moisture and temperature extremes
- Adhesion: Asbestos improved bonding between glass and frames
- Fire resistance: Mineral fibers provided fire-retardant properties
- Workability: Asbestos created smoother application characteristics[10]
Glaziers handled these products daily throughout their careers. The trade required:
- Mixing and kneading putty before application
- Applying glazing compound to window frames
- Tooling and smoothing freshly applied materials
- Scraping and removing old, dried putty during renovation
- Applying caulking around window perimeters
- Handling gaskets and weatherstripping materials[15]
Exposure intensified during renovation work. Removing old glazing putty from windows installed decades earlier released dried, friable asbestos-containing material that had become increasingly hazardous with age.
| "Glaziers worked with their hands in direct contact with asbestos-containing putty and caulking every day. They kneaded the material, pressed it into place, smoothed it with tools, and scraped off old material—all without any understanding of the asbestos hazards. The exposure was intimate and sustained over entire careers." |
| — Rod De Llano, Founding Partner, Danziger & De Llano |
What Does the Litigation Evidence Show About Glaziers' Asbestos Exposure?
Significant litigation against manufacturers of glazing products has established the hazards faced by glaziers and confirmed manufacturer liability for asbestos-related diseases.[14]
DAP Inc. Mesothelioma Lawsuits
DAP Inc., a major manufacturer of caulking compounds, putty, and sealants, has faced multiple mesothelioma lawsuits filed by workers exposed to their asbestos-containing products.
Judge Rejects DAP's Dismissal Motion: A court denied DAP's attempt to dismiss a mesothelioma lawsuit, allowing the case to proceed based on evidence of asbestos content in DAP caulking products and the plaintiff's exposure history.[16]
Multiple Lawsuits Filed: DAP has been named in numerous mesothelioma lawsuits filed by glaziers, construction workers, and others who worked with the company's asbestos-containing caulking and putty products. Courts have consistently allowed these cases to proceed to trial or settlement.
Veteran Lung Cancer Case: A New York judge denied DAP's motion to dismiss a veteran's lung cancer claim linked to asbestos exposure from the company's products, further establishing the legal foundation for glazier exposure claims.[17]
Italian National Mesothelioma Registry Data
The Italian National Mesothelioma Registry documented the construction sector as a primary source of occupational asbestos exposure:
- 3,574 mesothelioma cases with "certain" occupational exposure in construction (1993-2018)
- Mean latency: 47.8 years from first exposure to diagnosis
- Mean age at diagnosis: 70.3 years
- Glass installation and finishing trades represented documented categories within construction-related cases[6]
| ⚠ Latency Period Warning: The 47.8-year average latency period means glaziers exposed during the 1970s are being diagnosed with mesothelioma now in 2026. Workers exposed during the 1960s peak construction era may still develop disease in coming years. Related finishing trades including Plasterers, Painters, Drywall Installers, and Tile Setters faced similar exposure timelines. If you worked as a glazier before 1980 and experience breathing difficulties or chest pain, seek medical evaluation at a specialized treatment center immediately. |
Which Asbestos Products Did Glaziers Encounter?
Glaziers worked with multiple categories of asbestos-containing products. Understanding specific product exposures is critical for identifying responsible manufacturers and applicable bankruptcy trusts.[11]
Window Glazing Putty (5-15% Asbestos)
| Product Type | Manufacturers | Asbestos Content | Applications |
|---|---|---|---|
| Traditional glazing putty | DAP, Gibson-Homans | 5-15% | Window glass bedding |
| Metal sash putty | Various manufacturers | 8-12% | Steel window frames |
| Wood sash putty | DAP, others | 5-10% | Wood window frames |
| Face putty | Multiple brands | 6-12% | Exterior glazing finish |
Glazing putty was the primary material used to secure glass panes in window frames. Glaziers handled this material constantly—mixing it, applying it, tooling it smooth, and removing old dried material.[9]
Caulking Compounds (5-25% Asbestos)
| Product Type | Manufacturers | Asbestos Content | Applications |
|---|---|---|---|
| Building caulk | DAP, Tremco, Pecora | 5-15% | Window perimeter sealing |
| Glazing caulk | Various | 8-20% | Glass-to-frame sealing |
| Weatherproofing caulk | 3M, others | 10-25% | Exterior weather seals |
| Fire-stop caulk | Multiple | 15-25% | Fire-rated assemblies |
Caulking compounds were applied around window perimeters to create weather-tight seals. The higher asbestos content in some formulations reflected the need for enhanced durability and fire resistance.[18]
Glazing Compounds and Sealants (3-12% Asbestos)
| Product Type | Asbestos Content | Applications |
|---|---|---|
| Butyl glazing compound | 3-8% | Commercial window systems |
| Polysulfide sealant | 5-12% | Curtain wall systems |
| Structural glazing sealant | 4-10% | High-rise window installation |
| Setting blocks | Variable | Glass positioning in frames |
Gaskets and Weatherstripping (40-90% Asbestos)
| Product Type | Asbestos Content | Applications |
|---|---|---|
| Rubber gaskets | 40-60% | Window frame seals |
| Compression gaskets | 50-80% | Commercial storefront systems |
| Fiber gaskets | 70-90% | Industrial window assemblies |
| Weatherstripping | 30-50% | Door and window seals |
Gasket materials contained some of the highest asbestos concentrations of any products glaziers encountered. These materials were cut, fitted, and compressed during installation.[19]
| "DAP was one of the most widely used brands among glaziers for decades. The company's caulking and putty products were found on nearly every construction site. When we investigate a glazier's case, DAP is almost always among the products identified—and that creates a clear pathway to compensation." |
| — Paul Danziger, Founding Partner, Danziger & De Llano |
Which Manufacturers Produced Asbestos-Containing Glazing Products?
Several manufacturers produced glazing products containing asbestos. Understanding these companies helps identify applicable bankruptcy trusts and potential defendants.[20]
DAP Inc.
DAP was one of the largest manufacturers of caulking, putty, and sealant products in the United States. The company's products were widely used by glaziers throughout the peak asbestos exposure period.
Product Lines: Window putty, caulking compounds, sealants, adhesives Market Position: Industry leader with nationwide distribution Litigation Status: Active defendant in numerous mesothelioma lawsuits Legal Outcomes: Courts have consistently denied DAP's motions to dismiss asbestos cases[21]
3M (Minnesota Mining and Manufacturing)
3M produced a wide range of sealants, adhesives, and construction products, including glazing materials containing asbestos.
Product Lines: Construction sealants, weatherproofing products, adhesives Asbestos Content: Variable by product line—some contained 10-25% asbestos Trust Status: Active litigation and settlements[22]
Garlock Sealing Technologies
Garlock was a major manufacturer of gaskets and sealing products used in construction and industrial applications, including window and door assemblies.
Product Lines: Gaskets, packing materials, sealing products Asbestos Content: 40-90% in gasket and packing materials Trust Status: Garlock Sealing Technologies Asbestos Trust established[23]
Additional Manufacturers
| Manufacturer | Products | Trust/Litigation Status |
|---|---|---|
| Tremco | Caulking, sealants | Active defendant |
| Pecora Corporation | Glazing compounds | Active defendant |
| Gibson-Homans | Window putty | Historical manufacturer |
| Flexitallic | Gaskets, sealing | Trust established |
| Crown Cork & Seal | Gaskets, sealing | Active defendant |
How Did Glaziers Get Exposed to Asbestos?
Glaziers encountered asbestos through multiple exposure mechanisms during typical work activities.[24]
Mixing and Kneading Putty
Putty preparation generated direct exposure. Before application, glaziers worked putty by hand to achieve proper consistency:
- Removing putty from containers released surface dust
- Kneading and rolling putty created friction that released fibers
- Adding linseed oil or other modifiers disturbed dried surface material
- Extended handling created cumulative fiber exposure
Applying Glazing Compounds
The application process required intimate contact with asbestos-containing materials:
- Pressing putty into window frames released fibers into the breathing zone
- Tooling and smoothing created friction that released embedded fibers
- Working in confined spaces (window openings) concentrated exposure
- Repetitive application throughout workdays accumulated exposure
Removing Old Putty and Caulking
Renovation work created the highest exposures. Removing aged glazing materials required:
- Scraping dried, brittle putty that had become friable with age
- Chiseling out hardened material that crumbled upon disturbance
- Sanding window frames to remove residual material
- Wire brushing frames to prepare surfaces for new glazing
Aged asbestos-containing putty releases fibers more readily than fresh material because weathering and oxidation break down the binder, leaving asbestos fibers more loosely bound.[5]
Cutting and Fitting Gaskets
Glaziers cut gasket materials to size for window and door installations:
- Cutting compressed asbestos gaskets released fiber-laden dust
- Fitting and compressing gaskets during installation released additional fibers
- Trimming excess material after installation created exposure
Caulking Application
Applying caulking around window perimeters exposed glaziers to asbestos compounds:
- Cutting caulk tubes released surface fibers
- Tooling fresh caulk created friction exposure
- Cleaning tools spread asbestos-contaminated material
| ℹ Did You Know: Glaziers often worked without gloves because direct hand contact was necessary to properly work putty and achieve smooth finishes. This meant asbestos fibers contacted bare skin throughout each workday, and fibers could be ingested when workers ate or smoked without washing their hands. |
Are Glaziers Still at Risk from Asbestos Today?
While asbestos-containing glazing products are no longer manufactured, legacy materials in existing buildings create ongoing exposure risk for glaziers performing renovation, repair, and replacement work.[8]
Legacy Asbestos in Existing Buildings
Asbestos-containing putty, caulking, and gaskets remain in place in:
- Residential homes: Original windows in pre-1980 housing
- Commercial buildings: Office buildings, retail spaces with original glazing
- Industrial facilities: Factories, warehouses with steel-framed windows
- Institutional buildings: Schools, hospitals, government buildings
- Historic structures: Buildings where original materials have been preserved
High-Risk Current Activities
- Window replacement: Removing original glazing from pre-1980 windows
- Restoration work: Preserving historic windows requires putty removal
- Weatherization projects: Removing and replacing old caulking
- Building renovation: Disturbing original window assemblies
- Demolition: Breaking apart structures with original glazing intact
OSHA Regulations for Current Workers
OSHA's Construction Industry Asbestos Standard (29 CFR 1926.1101) establishes requirements for glaziers encountering asbestos materials:
- Permissible Exposure Limit: 0.1 f/cc (8-hour TWA)
- Class II Work: Removal of asbestos-containing caulking, putty, and gaskets
- Required Controls: Wet methods, HEPA vacuums, containment as appropriate
- Respiratory Protection: Required when exposures may exceed PEL
- Training: Required before working with asbestos-containing materials
| ⛔ Critical Safety Warning: Never remove glazing putty, caulking, or gaskets from windows installed before 1980 without professional asbestos testing. Window replacement in older buildings frequently disturbs asbestos-containing materials. Dry scraping of old putty can release dangerous fiber concentrations. Contact a licensed asbestos inspector before any window renovation project. |
What Compensation Is Available for Glaziers with Mesothelioma?
Glaziers diagnosed with mesothelioma, asbestosis, or asbestos-related lung cancer may recover substantial compensation through multiple sources.[25]
Asbestos Bankruptcy Trust Funds
More than 60 active asbestos bankruptcy trusts hold over $30 billion available for qualified claimants. Glaziers typically qualify for claims against multiple trusts based on exposure to products from various manufacturers.[12]
Key trusts for glaziers include:
| Trust Fund | Products Covered | Typical Payment Range |
|---|---|---|
| Garlock Sealing Technologies Trust | Gaskets, packing, sealing | $4,000 - $175,000+ |
| Flexitallic Trust | Gaskets, sealing products | $3,500 - $150,000+ |
| Johns-Manville Trust | Various building products | $7,000 - $350,000+ |
| Owens Corning/Fibreboard Trust | Building materials | $4,000 - $200,000+ |
| Celotex Trust | Building products | $4,000 - $160,000+ |
| National Gypsum Trust | Building materials | $2,500 - $100,000+ |
Trust fund claims do not reduce your ability to pursue lawsuits, workers' compensation, or other compensation sources—these can be pursued simultaneously.[26]
Personal Injury Lawsuits
Glaziers may file lawsuits against companies that manufactured, distributed, or sold asbestos-containing products without adequate warnings.
Key defendants in glazier cases:
- DAP Inc.: Multiple courts have allowed mesothelioma cases to proceed
- 3M: Sealant and adhesive products
- Active gasket manufacturers: Crown Cork & Seal, Tremco, others
Average mesothelioma settlements for construction workers range from $1 million to $1.4 million.[13]
Wrongful Death Claims
Family members of glaziers who died from mesothelioma may file wrongful death claims to recover:
- Medical expenses incurred before death
- Lost income and future earnings
- Loss of consortium and companionship
- Pain and suffering damages
- Funeral and burial expenses[27]
| "The DAP litigation has been particularly important for glaziers because it establishes clear manufacturer liability for asbestos in caulking and putty products. When courts allow these cases to proceed, it validates the exposure claims of glaziers who worked with these products for years." |
| — Rod De Llano, Founding Partner, Danziger & De Llano |
What Documentation Supports a Glazier's Compensation Claim?
Building a successful compensation claim requires documenting work history, products used, and medical diagnosis. An experienced mesothelioma attorney will help gather and organize this evidence.[28]
Employment Documentation
- International Union of Painters and Allied Trades (Glaziers) records: Union membership, dispatch records, pension history
- Glass and Glazing Association records: If applicable
- Social Security earnings records: Documents employers and work periods
- W-2 forms and tax returns: Verify employment dates
- Co-worker testimony: Affidavits about products used and working conditions
Product Identification
- Putty and caulk brands used: DAP, Tremco, Pecora, others
- Gasket materials: Garlock, Flexitallic, Crown Cork & Seal products
- Project locations: Buildings where glazing work was performed
- Supplier records: Documentation of products purchased
- Photographs: Images of job sites, product containers
Medical Documentation
- Pathology reports: Confirming mesothelioma diagnosis
- Imaging studies: CT scans, X-rays showing disease
- Treatment records: Surgery, chemotherapy, radiation documentation
- Pulmonary function tests: Documenting respiratory impairment
- Physician statements: Connecting diagnosis to occupational exposure
| ✓ Good News for Glaziers: The successful litigation against DAP and other manufacturers has established clear legal precedent for glazier mesothelioma claims. Courts recognize that glaziers faced significant asbestos exposure from putty, caulking, and gasket products they handled daily. |
How Do Glaziers File Asbestos Compensation Claims?
The claims process involves multiple steps, but experienced mesothelioma attorneys handle all aspects on a contingency fee basis—no upfront costs, payment only if you recover compensation.[29]
Step 1: Free Case Evaluation
Contact an experienced mesothelioma attorney for confidential consultation at no cost. The attorney will review your diagnosis, discuss work history including glazing product exposure, explain legal options, and answer questions with no obligation.
Step 2: Case Investigation
Your legal team reconstructs complete employment history, identifies putty, caulking, and gasket products used, determines responsible manufacturers and applicable trusts, gathers medical evidence, and calculates potential compensation.
Step 3: Claims Filing
Claims filed with applicable bankruptcy trusts (Garlock, Flexitallic, etc.), courts for personal injury lawsuits against DAP and other defendants, workers' compensation boards, and insurance carriers as appropriate.
Step 4: Resolution
Most cases settle without trial through negotiation. Your attorney keeps you informed throughout and prepares for trial if fair settlement cannot be reached.
Timeline Expectations
- Trust fund claims: 3-12 months typical processing
- Lawsuit settlements: 6-18 months typical resolution
- First payments: May arrive in as little as 90 days for trust fund claims[30]
Frequently Asked Questions
What glazing products contained asbestos?
Window glazing putty (5-15% asbestos), caulking compounds (5-25%), specialty glazing sealants (3-12%), and gasket materials (40-90%) all contained asbestos fibers. Manufacturers including DAP, 3M, Tremco, Pecora, and Gibson-Homans produced asbestos-containing products that glaziers handled daily from the 1940s through 1980. The fibers improved durability, weather resistance, and fire-retardant properties.[9]
How did glaziers inhale asbestos from putty and caulking?
Glaziers released asbestos fibers during every stage of their work: kneading putty by hand, pressing it into window frames, tooling and smoothing the surface, and scraping out old dried material during renovation. Unlike most construction trades, glaziers worked without gloves because bare-hand contact was essential for proper finishing. Dried putty released fibers more readily than fresh material because weathering broke down the binder holding asbestos in place.[5]
Can glaziers sue DAP for mesothelioma?
Yes. DAP Inc. is an active defendant in ongoing mesothelioma litigation. Courts have repeatedly denied DAP's motions to dismiss asbestos cases, allowing claims by glaziers and other workers to proceed to trial or settlement. A New York judge denied DAP's dismissal attempt in a veteran's lung cancer case, further strengthening the legal precedent for glazier claims.[16]
What compensation can glaziers with mesothelioma receive?
Glaziers may recover compensation from multiple sources simultaneously: asbestos bankruptcy trust funds (60+ trusts holding $30+ billion), personal injury lawsuits against manufacturers like DAP and 3M, workers' compensation benefits, and wrongful death claims filed by surviving family members. Average mesothelioma settlements for construction workers range from $1 million to $1.4 million, and trust fund claims do not reduce eligibility for lawsuits.[12]
Which trust funds pay glazier mesothelioma claims?
Key trusts for glaziers include the Garlock Sealing Technologies Trust ($4,000-$175,000+), Flexitallic Trust ($3,500-$150,000+), Johns-Manville Trust ($7,000-$350,000+), Owens Corning/Fibreboard Trust ($4,000-$200,000+), Celotex Trust ($4,000-$160,000+), and National Gypsum Trust ($2,500-$100,000+). Glaziers with exposure to multiple manufacturers' products may file with several trusts simultaneously.[4]
Is there still asbestos in old windows?
Yes. Asbestos-containing putty, caulking, and gaskets remain in place in millions of pre-1980 residential homes, commercial buildings, industrial facilities, schools, hospitals, and historic structures. OSHA classifies removal of asbestos-containing caulk and putty as Class II work under 29 CFR 1926.1101, requiring wet methods, HEPA vacuums, and respiratory protection. Never dry-scrape old window putty without professional asbestos testing first.[8]
How long does it take for glaziers to develop mesothelioma?
The Italian National Mesothelioma Registry documented a mean latency period of 47.8 years from first asbestos exposure to mesothelioma diagnosis in construction-sector workers. This means glaziers who installed windows during the 1970s construction boom may only now be receiving diagnoses. Related trades including Plasterers, Painters, Drywall Installers, and Tile Setters face similar latency timelines.[6]
What evidence supports a glazier's mesothelioma claim?
Key documentation includes International Union of Painters and Allied Trades (Glaziers) membership records, dispatch histories, Social Security earnings records, co-worker affidavits identifying specific putty and caulk brands used, project location records, and medical pathology reports confirming diagnosis. DAP, Tremco, Pecora, and Garlock product identification is particularly valuable because these manufacturers have established litigation or trust fund histories.[28]
Quick Statistics
- Mean age at diagnosis: 70.3 years — the Italian Registry's figure for construction-sector mesothelioma patients, consistent with 1960s-1970s exposure and decades-long latency[6]
- OSHA PEL: 0.1 fibers per cubic centimeter — the current permissible exposure limit for asbestos; historic glazing work often exceeded this threshold by substantial margins[14]
- Class II OSHA classification — removal of asbestos-containing caulking and putty carries specific federal requirements for containment and worker protection[8]
- Fire-stop caulk: 15-25% asbestos — the highest concentration among caulking products glaziers applied in fire-rated building assemblies[2]
- Fiber gaskets: 70-90% asbestos — compressed asbestos gaskets for industrial window assemblies contained the densest fiber loading of any glazier product category[7]
- $7.3 million verdict — a construction worker asbestos exposure case that demonstrated the jury award potential for occupational mesothelioma claims[13]
- Contingency fee basis — mesothelioma attorneys represent glaziers with no upfront costs, collecting fees only from successful compensation recoveries[15]
- 90 days to first payment — the earliest timeline for trust fund disbursements once a qualifying claim is submitted and processed[30]
- 1-2 year filing deadline — many states impose statutes of limitations of just 1-2 years from mesothelioma diagnosis; Texas allows 2 years from diagnosis or discovery[27]
- Wrongful death claims available — surviving family members of glaziers who died from mesothelioma may recover medical costs, lost income, and loss of companionship damages[24]
Get Help Today
If you worked as a glazier before 1980 and have been diagnosed with mesothelioma, asbestosis, or asbestos-related lung cancer, you may be entitled to substantial compensation. The putty, caulking, and gaskets you handled daily contained hazardous asbestos that manufacturers failed to adequately warn workers about.
Time limits apply to mesothelioma claims. Statutes of limitations vary by state, with some allowing only 1-2 years from diagnosis. Texas allows 2 years from diagnosis or discovery of asbestos-related disease.
|
🛡️ Free Confidential Case Review for Glaziers Call today to speak with an experienced mesothelioma attorney 📞 (866) 222-9990 |
References
- ↑ 1.0 1.1 1.2 Mesothelioma Risk: Shipyard, Oil & Construction Workers Most at Risk - Danziger & De Llano
- ↑ 2.0 2.1 2.2 2.3 Asbestos and Construction Workers - Mesothelioma Lawyer Center
- ↑ 3.0 3.1 3.2 DAP Caulk Faces Multiple Mesothelioma Lawsuits - Mesothelioma Lawyer Center
- ↑ 4.0 4.1 4.2 Mesothelioma and Asbestos Trust Fund Payouts Guide - Danziger & De Llano
- ↑ 5.0 5.1 5.2 Asbestos Exposure in Home Remodeling - Mesothelioma.net
- ↑ 6.0 6.1 6.2 6.3 6.4 6.5 Occupational Exposure to Asbestos - Mesothelioma.net
- ↑ 7.0 7.1 7.2 7.3 Asbestos Gaskets - Mesothelioma.net
- ↑ 8.0 8.1 8.2 8.3 Hidden Asbestos Dangers in Older Homes - Mesothelioma Lawyer Center
- ↑ 9.0 9.1 9.2 Asbestos Exposure Lawyers - Danziger & De Llano
- ↑ 10.0 10.1 Occupational Asbestos Exposure - Mesothelioma Lawyer Center
- ↑ 11.0 11.1 What Products Contained Asbestos? - Mesothelioma.net
- ↑ 12.0 12.1 12.2 Asbestos Trust Fund Payouts Guide - Danziger & De Llano
- ↑ 13.0 13.1 13.2 Construction Asbestos Exposure Leads to $7.3M Verdict - Mesothelioma Lawyer Center
- ↑ 14.0 14.1 14.2 Top-Rated Mesothelioma Lawyers - Danziger & De Llano
- ↑ 15.0 15.1 Mesothelioma Compensation - Danziger & De Llano
- ↑ 16.0 16.1 Judge Rejects DAP's Bid to Dismiss Mesothelioma Lawsuit - Mesothelioma Lawyer Center
- ↑ New York Judge Denies DAP's Motion to Dismiss Veteran's Lung Cancer Claim - Mesothelioma.net
- ↑ 3M, Minnesota Mining and Manufacturing Company Asbestos Use - Mesothelioma.net
- ↑ Garlock Sealing Technologies Asbestos, Lawsuits, Trust Fund - Mesothelioma.net
- ↑ Product Liability and Asbestos - Mesothelioma.net
- ↑ Crown Cork & Seal Asbestos Exposure and Lawsuits - Mesothelioma Lawyer Center
- ↑ Crown Cork and Seal Asbestos Products, Lawsuits - Mesothelioma.net
- ↑ Garlock Sealing Technologies Asbestos Exposure, Lawsuits - Mesothelioma Lawyer Center
- ↑ 24.0 24.1 Mesothelioma Settlements - Danziger & De Llano
- ↑ Mesothelioma Compensation Claims - Mesothelioma.net
- ↑ Mesothelioma Trust Funds - Mesothelioma.net
- ↑ 27.0 27.1 How to Claim Asbestos Payouts After a Death - Danziger & De Llano
- ↑ 28.0 28.1 Mesothelioma Lawyers - Mesothelioma.net
- ↑ Mesothelioma Cancer Explained - MesotheliomaAttorney.com
- ↑ 30.0 30.1 New Mesothelioma Treatments - MesotheliomaAttorney.com